The HDMI network extender replaces the HDMI cable over a CAT5e or CAT6 cable (recommended) and can extend the HDMI signal for 60 meters, reducing costs. As HDMI cables are expensive, it is very difficult to transmit HDMI signals over long distances. The purpose of the extender is to achieve long-distance signal transmission with low-cost wires. Connection and operation
1. Use a HDMI cable to connect the signal source to the emitter of the extender. The cable length can be up to 60 meters
2. Use an HDMI cable to connect the signal end to the receiving end of the extension cable up to 60 meters
3. Use a cat5e cable or cat6 cable (recommended) to replace the HDMI cable to connect the emitter and receiver of the extender up to 60 meters
4. Connect the 5V power to the extender and power the extender
| DOA: (Dead-On-Arrival) items must be reported to IBC within 2 (Two) working days |
| from the date of purchase, otherwise it will be treated as an RMA item, and therefore |
| will fall under the RMA policy. |
| RMA: All applicable rules and procedures are described below. |
| In order to give you a better service with fast turnaround time, please follow the rules & procedures |
| described below: |
| Warranty does NOT COVER the following Accessories : |
| A. Power Supplies |
| B. Power Adapters (Printer Adapter, Notebooks, Scanners, Switches….) |
| C. Speakers, Keyboards, Mouse, Monitor Filter, Joystick… |
| D. PCI Adapters (Modem, LAN Cards, Sound Cards, PCI to USB, PCI Fire Wire….) |
| E. PCMCIA LAN , USB , Fire Wire |
| F. External case (2.5", 3.5", 5.25") IDE & SATA… |
| G. Switches (8 Ports) |
| H. USB products (Bluetooth, Infrared, LAN, Sound, Hub, USB To Serial, USB To Parallel…) |
| I. Compatible Toner supplies must be 60% filled to Proceed Under Warranty. |
| J. Monitors' dead pixels are NOT a reason to consider the unit as DOA. The number of dead pixels is to be defined by each brand's policy (No standard or/and unified policy for all monitors) |
| RMA Issuance & Authorization |
| 1. Before returning the Product, Please complete IBC's RMA/DOA Request Form |
| and send it with a copy of your invoice. |
| To download Request Form click here |
| 2. Serial number must be fully stated. Otherwise RMA will be rejected. |
| 3. A Copy of the invoice and the RMA form must be presented with the returned product |
| 4.The customer is responsible for implementing appropriate data storage and safeguards to protect his data against any accidental loss. IBC will not take responsiblity for any data problems that might occur. |
| 5. RMA number is valid for 30 days only- Any claim after this period will be rejected. |
| 6. Any out of warranty item will be rejected. |
| 7. RMA delivery & pickup are the customer’s responsibility. |
| 8. Items that are electrically or physically damaged are not covered by warranty. |
| 9. IBC will take no responsibility for any data loss due to product failure. |
| 10. Any Item without problem description will be rejected. |
| 11. Items are tested as per customer's problem Description. |
| 12. All products are subject to the manufacturer's warranty and its relative Terms & Conditions. |
| RMA |
| Tel.: 961-1-456123 ext: 218 |
| Fax: 961-1-456123 ext:123 |
| Email: rma@ibcleb.com |
Depending on where you live, the time and cost it may take for your exchanged product to reach you, may vary.
| HP Printers' Warranty Policy | |||||||||||||||||
|
. HP printers are covered with 1 Year Full Warranty; Starting from the selling invoice date
|
Free delivery
Free Delivery within Beirut! Shipping cost for orders outside of Beirut are calculated in checkout.
Offers
Benefit from our occasional offers
Top-notch support
Contact us by Phone, Email....